Description:
The Geotextile Tube Bag dehydration technology is an effective technology and a solution that has been proven safe for dehydration by many research centers around the world. It is made of high-performance, special polypropylene monofilament, flat yarn or split film yarn for cloth processing and special sewing.
Advantage:
1. Resistant to moisture.
2. Chemical resistance.
3. Anti-biodegradation and animal destruction.
4. High temperature resistance.
5. UV resistance.
| Item | Unit | Technical Parameters | ||||
| Tube 500 | Tube 750 | Tube 1000 | ||||
| Breaking strength | MD | KN/m >= | 70 | 120 | 200 | |
| CD | KN/m >= | 90 | 120 | 200 | ||
| Elongation of break | MD | %<= | 20 | 20 | 20 | |
| CD | %<= | 10 | 10 | 10 | ||
| Sewing Tensile strength | >=% | 80 | 80 | 80 | ||
| Bursting Strength(CBR) | KN>= | 8 | 14 | 18 | ||
| Equivalent opening size(O90) | mm | 0.2-0.6 | 0.2-0.6 | 0.2-0.6 | ||
| Permeability(Q50) | L/m2/s>= | 20 | 13 | 15 | ||
| UV-resistance(500HRS strength retention) | %>= | 90 | 80 | 80 | ||
| | |
| Convenient and quick Diameter and length can be adjusted according to the need, high plasticity, and can be stacked, transportation is convenient. | Low noise Fully enclosed construction, little noise, is not easy to cause secondary pollution. |
| | |
| Wide application The size of the wastewater treatment and sludge dewatering engineering all can use. | Capacity reduction effect is good Within one month of the sludge volume can reduce more than 90%, basically for subsequent removal and handling easier. |
Application:
1. Both rivers.
2. mine regreen.
3. Treatment of landslides, gutters, soil erosion, irrigation systems.
4. Constructed wetland repair.
5. Green roof.
PS: The first step is to fill, high strength and permeable geotextile bag body needed to make into actual, then filling slurry into the bag.
PS:The second step is drainage, because the geotextile that makes up the bag has tiny holes that trap it in the mud, solids can also discharge water from the mud, which can effectively reduce the volume of inclusion in the bag body,The bag body can be repeatedly filled until the allowable height of the bag material is reached, and the discharged water can be reused.
PS: The third step is consolidation. After repeated filling and drainage, the fine particles left in the bag body will gradually consolidate due to drying.
Anhui Zhonglu Engineer Materials Co., Ltd
Angela:86-18095658976