Product introduction
The HDPE Geocell is three dimensional, honeycomb like structures manufactured from high density polyethylene
Technical parameter：
| Geocell | ||||
| item | PP | PE | ||
| tensile strength of Strip ≥（Mpa） | 23 | 20 | ||
| Tensile strength of weld ≥（N/cm） | 100 | 100 | ||
| Tensile strength of cell edge ≥（N/cm） | 200 | 200 | ||
| Intermediate tensile strength of cell sheet ≥（N/cm） | 120 | 120 | ||
Application
Load Support
Geocell is a confinement system that performs better than conventional crushed stone sections, and it provides an expedient construction technique for access roads over soft ground without being adversely affected by wet weather conditions. It can also be used to strengthen paved areas.
Retaining Wall
GeoCell can be used for both cut and fill applications on retaining walls. The flexible HDPE panels are custom made to the front to back dimensions required by the project engineer. GeoCell can be easily installed around curves, pipes or other structures. The panels are constructed with the front facing strip colored green or tan to blend in with the surroundings. GeoCell panels can be stacked to create a 90 degree wall, or they can be stair stepped at every layer to create exposed cell for vegetation.