English
Pусский
Español

You are here: Home / News / Company News / Geotube Dewatering for Capturing Dredged Sludge

Geotube Dewatering for Capturing Dredged Sludge

Publish Time: 2024-04-17     Origin: Site

Description:

Geotube is a large pipe bag and inclusion made of high-strength geotextile. Its diameter can be changed according to needs, and its maximum length can reach tens of meters. Geotubes were originally used in embankment projects, and have now been applied to environmental protection, agriculture and other fields. As people's research deepens, their application fields will become more and more extensive.

Advantage:

1. Resistant to moisture.
2. Chemical resistance.
3. Anti-biodegradation and animal destruction.
4. High temperature resistance.
5. UV resistance.


Compared with the traditional direct stacking method in the mud dump, geotube has the following advantages:

1. Economical, no large-scale equipment and factory investment is required, and only a small number of non-professional operators are needed; the sludge dehydration part does not require electricity, and has the advantages of energy saving and emission reduction.

2. Convenience, the diameter and length of the geotube can be adjusted as needed. It has strong plasticity, is stackable, and is easy to transport.

3. Environmentally friendly, fully enclosed construction, almost no noise, and less likely to cause secondary pollution.

4. High efficiency, it can fully meet the processing capacity of wastewater and sludge. The processing capacity can increase or decrease the number of pipe bags according to the flow rate of the pump.

5. The volume reduction effect is good. The sludge volume can basically be reduced by more than 90% within a month, making subsequent removal and treatment easier.


Iterm Unit Standard Index
HT500 HT750 HT1000
Tensile Strength Radial Direction KN/M ISO 10319-2015 85 130 220
Zonal Direction KN/M ISO 10319-2015 115 120 200
Elongation at Break Radial Direction % ISO 10319-2015 13 12 13
Zonal Direction % ISO 10319-2015 8 8 8
Joint Tensile Strength KN/M ISO 10319-2015 90 100 170
CBR KN GB/T14800-2010 9 15 20
Dynamic Perforation MM GB/T17630-1998 8 10 8
Effective Aperture(O90) MM GB/T14799-2005 0.45 0.4/0.28 0.45
Permeability(Q50) L/m2/s GB/T15789-2005 35 14 18
UV Resistance % ASTM D4355-2014 90 85 85


Professional geosynthetics manufacturer
Anhui Zhonglu Engineer Materials Co., Ltd
Angela:86-18095658976


  +86-18095658976
 +86-551-65540070
   shaun@zhongloo.com
  Innovation Entrepreneurship Park Economic Development District in Hefei, Anhui China
Copyright © 2021 Anhui Zhonglu Engineering Materials Co., Ltd. | Sitemap    Support by Leadong