Description:
The Geotextile Tube Bag dehydration technology is an effective technology and a solution that has been proven safe for dehydration by many research centers around the world. It is made of high-performance, special polypropylene monofilament, flat yarn or split film yarn for cloth processing and special sewing.
Geotubes have different levels of strength and permeability, high UV resistance and durability such as sea water and microbial erosion.
It can be applied to many water conservancy and ocean engineering, such as: bank protection, breakwater, wave breakwater, river surge regulation, tubular containment structure, etc.
At the same time, it is used in the dehydration treatment of industrial waste, sludge treatment, coal mine and agricultural waste.
Item | Unit | Technical Parameters | ||||
Tube 500 | Tube 750 | Tube 1000 | ||||
Breaking strength | MD | KN/m >= | 70 | 120 | 200 | |
CD | KN/m >= | 90 | 120 | 200 | ||
Elongation of break | MD | %<= | 20 | 20 | 20 | |
CD | %<= | 10 | 10 | 10 | ||
Sewing Tensile strength | >=% | 80 | 80 | 80 | ||
Bursting Strength(CBR) | KN>= | 8 | 14 | 18 | ||
Equivalent opening size(O90) | mm | 0.2-0.6 | 0.2-0.6 | 0.2-0.6 | ||
Permeability(Q50) | L/m2/s>= | 20 | 13 | 15 | ||
UV-resistance(500HRS strength retention) | %>= | 90 | 80 | 80 |
| |
Convenient and quick Diameter and length can be adjusted according to the need, high plasticity, and can be stacked, transportation is convenient. | Low noise Fully enclosed construction, little noise, is not easy to cause secondary pollution. |
| |
Wide application The size of the wastewater treatment and sludge dewatering engineering all can use. | Capacity reduction effect is good Within one month of the sludge volume can reduce more than 90%, basically for subsequent removal and handling easier. |
Application:
1.Sludge Treatment
The volume of sludge can be reduced by more than 90%, and it contains a higher proportion of solid content, making it easier to remove and process.
2.Revetment, Breakwater Core
The embankment core filling geotechnical pipe bag breakwater is a breakwater made of new materials. It forms a kind of breakwater by filling the geotechnical pipe bag with sea sand. Not only saves the construction cost of the breakwater, but also makes better use of environmental resources, and can well meet the construction and functional requirements of the breakwater.
3.Light Industry, Agriculture and Aquaculture
Geotube bag dehydration technology reduces the water content in the filtration process, simplifies the water recycling process, and intercepts more than 90% of the suspended solid particles. It is an ideal choice for cleaning sludge storage tanks, clarification tanks and filtering waste projects.
PS: The first step is to fill, high strength and permeable geotextile bag body needed to make into actual, then filling slurry into the bag.
PS:The second step is drainage, because the geotextile that makes up the bag has tiny holes that trap it in the mud, solids can also discharge water from the mud, which can effectively reduce the volume of inclusion in the bag body,The bag body can be repeatedly filled until the allowable height of the bag material is reached, and the discharged water can be reused.
PS: The third step is consolidation. After repeated filling and drainage, the fine particles left in the bag body will gradually consolidate due to drying.
Anhui Zhonglu Engineer Materials Co., Ltd
Angela:86-18095658976