Publish Time: 2022-10-11 Origin: Site
1,High tensile strength at both longitudinal (MD) and transverse direction(XMD).
2,Improving bearing capacity of foundation;
3,Preventing cracking and subsiding;
4,Convenient to construct, reducing cost and maintaining expense.
1. It is applied in reinforcement of roadbed and road surface of road, railway, airport, etc.;
2. It is applied in foundation reinforcement of perpetual bearings such as large-scale park, dock, and freight yard, etc.;
3. It is applied in the secondary reinforcement of earth slope after being reinforced by uniaxial plastic geogrid so as to further reinforce the earth slope and prevent water and soil loss;
4. It is applied in the reinforcement of culvert;
5. It is applied in slope protection of railway and road;
6. Reinforcement of mine and gallery;
7. Special network used in livestock breeding;
8. Special network used in cage culture.
| Index Properties | Test Method | Unit | GG1515 | GG2020 | GG2525 | GG3030 | GG4040 | GG4545 | GG5050G | |||||||||
| MD Value | TD Value | MD Value | TD Value | MD Value | TD Value | MD Value | TD Value | MD Value | TD Value | MD Value | TD Value | MD Value | TD Value | |||||
Polymer | - | - | PP | - | PP | - | PP | - | PP | - | PP | - | PP | - | PP | - | ||
| Minimum Carbon Black | ASTM D 4218 | % | 2 | - | 2 | - | 2 | - | 2 | - | 2 | - | 2 | - | 2 | - | ||
| Tensile Strength @ 2% Strain | ASTM D 6637 | kN/m | 5 | 5 | 7 | 7 | 9 | 9 | 10.5 | 10.5 | 14 | 14 | 16 | 16 | 17.5 | 17.5 | ||
| Tensile Strength @ 5% Strain | ASTM D 6637 | kN/m | 10.5 | 10.5 | 14 | 14 | 17 | 17 | 21 | 21 | 28 | 28 | 32 | 32 | 35 | 35 | ||
| Ultimate Tensile Strength | ASTM D 6637 | kN/m | 15 | 15 | 20 | 20 | 25 | 25 | 30 | 30 | 40 | 40 | 45 | 45 | 50 | 50 | ||
| Strain @ Ultimate Strength | ASTM D 6637 | % | 13 | 13 | 13 | 13 | 13 | 13 | 13 | 13 | 13 | 13 | 13 | 13 | 13 | 13 | ||
| Structural Integrity | ||||||||||||||||||
| Junction Effciency | GRI GG2 | % | 93 | 93 | 93 | 93 | 93 | 93 | 93 | 93 | 93 | 93 | 93 | 93 | 93 | 93 | ||
| Flexural Rigidity | ASTM D 7748 | mg-cm | 250,000 | - | 750,000 | - | 1,000,000 | - | 2,000,000 | - | 4,800,000 | - | 6,000,000 | - | 8,000,000 | - | ||
| Aperture Stability | COE Method | m-N/deg | 0.32 | - | 0.50 | - | 0.65 | - | 0.75 | - | 0.98 | - | 1.05 | - | 1.10 | - | ||
| Dimensions | ||||||||||||||||||
Roll Width | - | m | 3.95 or 5.95 | 3.95 | ||||||||||||||
| Roll Length | - | m | 75 | 50 | ||||||||||||||
| Note: MD = Machine Direction; TD = Transverse Direction. | ||||||||||||||||||
Any more questions,please let us know.
Angela:86-18095658976