Steel Plastic Composite Geogrid For Road High Tensile Strength Geogrid

1.Product Parameter

Steel Plastic Composite Geogrid
item	Specification
Type	GSZ 30-30	GSZ 50-50	GSZ 60-60	GSZ 70-70	GSZ 80-80	GSZ 100-100	GSZ 150-150
Vertical and horizontal ultimate tensile strength≥（KN/M）	30	50	60	70	80	100	150
Vertical and horizontal ultimate tensile strength elongation≤（%）	3
Peel force of connection point≥（KN）	300				500
width≤(M)	6

2.Product Description

The Steel Plastic Composite Geogrid uses high tensile steel wire (PET yarn and fiberglass yarn) specially
handled with polyethylene(P.E) and other assistants.
After squeeze and cooling procedures, steel wires turns to high-strength anti-pull belt with roughembossing surfaces and PE coating.
Earthwork belts are warp knitted at vertically and horizontally directions and welded the joints using a

special unltrial-sonic welding technology to structure steel plastic composite geogrid.

3. Product Application:

1)Well pull: Longitudinal and crosswise tensile strength per linear meter can reach 30 to 120 KN.

2) Small deformation: the yield elongation of steel plastic integral geogrid is not bigger than 3%.

3) Nodal point is high.

4) Lifespan is long. It has the properties of anti - oxidation and anti - aging. It can be possible to meet each kind of

permanent works and its lifespan can be 100 years above.

5) It can reduced the project cycle effectively and saved 10% to 50% of the building cost of projects.

6) The construction is convenient. It is easy to lay, join, locate and flat.

4.Project Features:

Soft foundation reinforcing for highway, railway, Slop protecting projects, landfill side

Function: