Product introduction
The steel plastic composite geogrid uses high tensile steel wires (PET yarn or fiberglass yarn) specially handled with polyethylene(P.E) and other assistants. After squeeze and cooling procedures, steel wires turns to high-strength anti-pull belt with rough embossing surfaces and PE coating. Earthwork belts are warp knitted at vertically and horizontally directions and welded the joints using a special unltra-sonic welding techology to structure steel plastic composite geogrid.
Technical parameter
Project | TGSG30-30 | TGSG45-45 | TGSG60-60 | TGSG80-80 | TGSG100-100 | TGSG120-120 |
Two-way Limit-Rally (KN/m)≥ | 30 | 45 | 60 | 80 | 100 | 120 |
Two-way Limit elongation (%)≤ | 3 | 3 | 3 | 3 | 3 | 3 |
Elongation at 1% of the Rally (KN/m)≥ | 23 | 36 | 48 | 63 | 81 | 98 |
Product Features
1.The intensity is high and the distort is small;
2.The wriggle is small;
3.Anti-corrosive,the life is long,the geogrid take the plastic material as a protector, auxiliary enables it by each kind of assistant to have the antiaging,the oxidation susceptibility again,but acidproof ,alkali,salt and so on adverse circumstance corrosion.Therefore ,the steel modles the earhwork gril to be possible to meet each kind of permanent work100year above use need,and the perfor mance is superior,the size stability is good;
4.The construction is convenient ,the cycle is quickly short.the cost is low;the steel plastic complex geogrid to lay down,joining ,the localization to be easy,to be smooth,avoids overlapping crossover,but reduced the project cycle effectively,saved the building cost of projects by 10%-50%.