Product introduction
Steel-plastic compound geogrid is made of steel-plastic stripes by new process, with regular pressed in the surface, it can bear extreme strength and increase friction between soil. On the whole limited soil shear, side extrusion and uplift, while the reinforced soil cushion stiffness, which is better for the spread of the upper base load and distribute to the underlying soft soil, improve the bearing ability. For reinforced soil cushion, It increases the compression layer of the overall stiffness, and easier to adjust the deformation of basement. The steel-plastic compound geogrid , formed reinforced composite cushion structure, is flexible and can very well absorb the energy of the earthquake, so the seismicity is good.
Technical parameter
| Project | TGSG30-30 | TGSG45-45 | TGSG60-60 | TGSG80-80 | TGSG100-100 | TGSG120-120 |
| Two-way Limit-Rally (KN/m)≥ | 30 | 45 | 60 | 80 | 100 | 120 |
| Two-way Limit elongation (%)≤ | 3 | 3 | 3 | 3 | 3 | 3 |
| Elongation at 1% of the Rally (KN/m)≥ | 23 | 36 | 48 | 63 | 81 | 98 |
Product Features
1.Large scale of tensile strength from 30kN/m to 200kN/m and the deformation is small;
2.Low creep elongation as low as 3% and high tensile modulus at large force.
3.Anti-corrosive, long service life, the steel plastic composite geogrid take the PE material as a protector, auxiliary enables it by each kind of assistant to have the antiaging,the oxidation susceptibility again,but acidproof ,alkali,salt and decreasing installation damages. Therefore ,the steel plastice composite geogrid are possible to meet each kind of permanent projects with 100 years above design life, and the performance is superior, the aperture stability is good;
4. Easy Installation.