Publish Time: 2023-09-06 Origin: Site
1.Product Description
The high-density polyethylene used in the steel-plastic composite geogrid can ensure that it will not be corroded by acid, alkali, salt solutions, or oils at room temperature; it will not be attacked by water dissolution or microorganisms. At the same time, the polymer properties of polyethylene are also sufficient to resist the aging caused by ultraviolet radiation. After the grid is stressed, the vertical and horizontal ribs work together, and no joints will be cracked or damaged. In actual engineering, after the packing is compacted, it is not corroded by ultraviolet light and oxygen, so it can fully meet the requirements of permanent engineering construction.
2.Product Funtion
1)High strength,small deformation
2)Low creep
3)Corrrosion resistance,long service life
4)Convenient construction,short cycle,low cost
5)Plastic geogrid laying, lap and easy positioning,formation,to avoid the overlapping, can effectively
relationship cycle engineering and save 10% of the engineering fraud-50%
3.Product Parameter
| Steel Plastic Composite Geogrid | |||||||
| item | Specification | ||||||
| Type | GSZ 30-30 | GSZ 50-50 | GSZ 60-60 | GSZ 70-70 | GSZ 80-80 | GSZ 100-100 | GSZ 150-150 |
| Vertical and horizontal ultimate tensile strength≥（KN/M） | 30 | 50 | 60 | 70 | 80 | 100 | 150 |
| Vertical and horizontal ultimate tensile strength elongation≤（%） | 3 | ||||||
| Peel force of connection point≥（KN） | 300 | 500 | |||||
| width≤(M) | 6 | ||||||
4.Application
Mainly used in highway,railway,bridge,approach, whraf and revetment, dams,slag field of soft soil4.Project Cases
foundation reinforcement, retaining wall and the pavement cracking engineering field.
Summer Meng
whatsapp:0086-18056028960