Product introduction
The steel plastic welded geogrid uses high tensile steel wire (or other fiber)specially handled and polyethylene(P.E)with other assistants. Then squeeze it out and make it become composite high-strength anti-pull belt and the surface has rough embossing then it is reinforcement earthwork belt.Warp knitting vertically and horizontally using this single belt and welding the joint using a special welding techology to molding is reinforcement geogrid
Technical parameter
| pp welded geogrid | |||||||
| item | Specification | ||||||
| Type | 25 | 40 | 60 | 80 | 100 | 125 | 150 |
| Standard breaking strength ≥（KN/M） | 25 | 40 | 60 | 80 | 100 | 125 | 150 |
| Vertical and horizontal nominal tensile strength elongation ≤ (%) | 12 | 13 | |||||
| Stretching force of 2% elongation in vertical and horizontal directions ≥(KN/M) | 10 | 20 | 22 | 35 | 55 | 60 | 85 |
| Stretching force of 5% elongation in vertical and horizontal directions ≥(KN/M) | 15 | 25 | 40 | 55 | 65 | 90 | 100 |
| Ultimate peel force of connection point≥（N） | 30 | ||||||
Applying to all kinds of roads, railways, airports enhance road embankment reinforced.
slope protection for railways, highways.enhanced further enhance the soil, prevent soil erosion.
applies culvert enhancement.
the foundation for large parking garages and other permanent load and terminal enhancements.