hdpe Plastic Grass Paver gravel stabilizer grid

The grass grid uses a modified high molecular weight HDPE as the raw material. It is green and environmentally friendly and is completely recyclable; the lawn and parking lot are perfectly realized. Save investment; unique flat -cut -type overlap, provincial labor, fast, adjustable telescopic joint.Anhui Zhonglu (www.zlgeo.com).

Product Advantage

1. Environmental protection, non -toxic, non -polluting, impact resistance, anti -aging, anti -ultraviolet rays

2. Failure resistance and corrosion resistance, good flame -resistant, strong planting function

3. Reduce ground reflection and reduce ground heat radiation

4. Reduce ground sound wave transmission and reduce noise pollution

5. Reduce dust and purify the air

6. The rain is naturally leaked, soil is not lost, and there is no accumulation of water

7, natural circulation of water, air and fertilizers, soil layers are not ended

8. Increase green area and simple construction, light weight

9. Can be freely combined and disassembled.

10. Good load -bearing effect: You can withstand more than 200T/㎡ or more

Grass grid base treatment for parking space:

1. The foundation soil shall be compacted layer by layer, and the compactness shall reach more than 85%; If it belongs to soft plastic-flow plastic silt layer, it is recommended to throw and fill block stones and roll them until they are dense.

2. Set 150 thick gravel cushion. The specific method is to mix 10% of medium-coarse sand, 60% of crushed stone with 20-40 grain size, and 30% of cohesive soil, and then spread and roll them until they are dense.

3. Set 60 thick stable layer (also used as planting layer). The method of stabilizing layer is: 25% crushed stone with particle size of 10-30, 15% medium-coarse and fine river sand, 60% cultivated soil mixed with appropriate amount of organic fertilizer, the three are evenly mixed, spread on the gravel cushion, and compacted, which can be used as the base course of grass planting.

4. Scatter a little organic fertilizer on the base layer, and pave the grass grid manually. The overall dimensions of the grass planting grid are designed according to the size modulus of the parking space, and generally do not need to be cut when paving; When the parking space has special shape requirements or there is a manhole cover on the parking space, the grass grid can be cut to meet the requirements of different shapes of the parking space.

5. Scatter planting soil in the concave planting groove of the grass planting grid and sweep it evenly into the grass planting grid hole with a broom. The height of the soil layer shall be 5-10mm lower than the plane of the grass planting grid.

6. Pave turf or sow grass on the soil layer planted in the grass planting box. The turf shall be compacted on the planting soil when paving. Water and maintain the vehicle until the grass is alive.

If you have any needs or questions, please feel free to contact us.

Summer +8618056028960,Summer@zhongloo.com,

Anhui Zhonglu (www.zlgeo.com).